Maintenance - Whirlpool XWT-758 Service Manual

OPERATING INSTRUCTIONS
Spin drying
1.Lift the outer spin dryer lid and open the inner spin dryer
lid.
2.Place the rinsed clothing into the spinner tub.
3.IMPORTANT: To ensure correct balancing of the spinner
unit, distribute clothing evenly in the tub before spinning
(see n otes for spinning ).
4.Place the "SPINNER CAP" firmly on top of the clothing
(see notes for spinning).
5.Close both the inner and outer spin dryer lids.
6.Turn the "SPIN TIMER SELECTOR" clockwise to the
desired spin time (see spin-drying time chart). The spin
cycle will automatically commence.
7.Make sure the load is balanced to spin
WARNING: DO NOT OPEN THE SPIN LID UNTIL THE
SPINNING HAS STOPPED.
Notes for spinning
Distribute clothing evenly
in the tub before spinning.

MAINTENANCE

MAINTENANCE
Pull out the power plug
after washing.
evenly .
Put the spinner cap in the
right place of the spinning tub.
Spinner cap
Clothes
Spin dryer
Wipe the wash tub with a
clean and dry cloth.
Clean tubs after bleaching or
starching, otherwise, some
deposits will accumulate.
Avoid water splashing on the
c on t r ol pa n e l to a v o id
damage to internal electrical
wirings of the unit.
3
SPIN TIMER SELECTOR
Type of the clothes Spin-drying time
Shirts (synthetic)
Undershirts
Work clothes
Do not put hands into
the spinning tub before
it stops.
Please clear the remains out
from of the lint filter in time.
1~2 min
3~5 min
5 min
Remove the
lint filter.
Clean and
rinse it
thoroughly.
Reinstall.