FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Requirement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Disposal and Recycling Information Damaged batteries should be treated as hazardous materials. Do not return the device if the battery is swelling, leaking, or if you in any other way suspect that the battery is damaged. In this case, please make sure you dispose of or recycle the item and its accessories according to local laws and regulations.
4.1.1 Key Operations Please refer to the following table for information about the physical keys on the projector: Power Return (in sub-menu) Volume - Previous Volume + Next Enter Play/Pause System Menu (in HDMI Mode) Remote Please note: • Handle the remote control carefully. Dropping or jarring the remote can damage internal components.
Basic Operations Power ON Press and hold the Power key on the projector for 3 seconds to turn on the projector. Power OFF 1. Press and hold the Power key on the projector for 3 seconds to turn off the projector. 2.
Charging The projector can be powered by the included Power Adapter or the internal rechargeable battery. To obtain maximum battery life, it is highly suggested that you charge the battery for at least 4 hours the first time. 1. Ensure the projector is turned off and connect it to the Power Adapter. 2.
Menu Options Video Access this option to play video files stored on a microSD card. Audio Access this option to play audio files stored on a microSD card. Image Access this option to view image files stored on a microSD card. HDMI Access this option to activate HDMI Mode on the projector.
Input Sources HDMI Project the display from any device supporting HDMI by activating the HDMI Mode from the Home Screen and connecting the device via an HDMI cable. Use appropriate adapters if needed. Please note: • The projector supports a full 1080p HDMI input source at 60Hz. microSD Card Make sure to insert the microSD card the correct way to playback and view content.
Product Maintenance Projector • Charge the battery for at least 4 hours the first time. • If the projector gets dirty: wipe clean with a dry cloth. • Do not wipe the projector with a damp cloth. Remote Control The remote control comes with an included CR2025 3V battery in the original package. Please use the same type of battery when replacement is needed.
11 Frequently Asked Questions Question: Why is the indicator light status showing blue, but the projection screen is not showing? Answer: Make sure not to press and hold the Power key too long. Release the Power key as soon as the indicator turns blue. Please be patient and do not push the Power key repeatedly during the system boot process, which may cause the projector to crash.