Table of Contents
Advertisement
Troubleshooting Guide
Should this unit exhibit a problem, check the following before seeking service:
No Power
• Power is not on; press the ON/OFF button to turn power on.
• Confirm the AC adapter is connected securely to the back of the unit.
• Connect the unit to a different outlet.
• If using batteries, replace with new ones.
No Sound – General
• Master Volume is set to minimum; raise volume.
• If using an external device, raise the volume.
• Check if the LINE IN jack is still connected by a cable.
No Sound – If connected to a TV
• Volume on the TV is muted or too low.
• Correct source (usually AV) was not selected on the TV's menu.
Lyrics do not appear on the TV screen
• If connected to a TV, Video plug is not connected properly; see page E5.
• If connected to a TV, select the correct source on the TV (usually AV).
• The file/track being played is not a track recording with lyrics. These are the only files
that allow you to view the lyrics on the TV screen.
• Nothing will appear on the TV screen when using Line In.
No sound from the microphone
• Make sure the microphone is firmly connected to the MIC 1 or MIC 2 jack.
• Make sure the mic's ON/OFF switch is set to the ON position.
• Make sure the MIC VOLUME control is not set too low.
• MASTER VOLUME control is set to minimum; raise volume.
• Adjust the ECHO control past the mid point on the Singing Machine.
The Bluetooth device cannot be paired or connected with the unit
• Ensure any other Bluetooth devices are turned off to avoid accidental pairing.
• You have not activated the Bluetooth function of your device; see page E11 or refer to
the Bluetooth device user's manual.
• The system is not in pairing mode; press the STOP button to restart pairing.
The Music is not available on the unit after successfully connecting the Bluetooth
• Ensure your Bluetooth device can support the A2DP Bluetooth profile.
• The volume on the external Bluetooth device is set to low or muted; raise as desired.
— E15 —
Advertisement
Table of Contents
