With A Printer (Pictbridge) - Panasonic VDR-D160GC Operating Instructions Manual

LSQT1182(GC ENG).book 204 ページ ２００７年１月１８日 木曜日 午後４時４４分

With a printer (PictBridge)

With a printer (PictBridge)
To print pictures by directly connecting this unit to the printer, use a printer compatible with
PictBridge. (Read the operating instructions for the printer.)
≥ Use the AC adaptor to free you from worrying about the battery running down.
¬ Insert an SD card with recorded images in the unit, turn on the unit and then
rotate the mode dial to select
1 Press the MENU button, then select [
USB FUNCTION] # [PictBridge] and press the
[
joystick.
≥ Press the MENU button to exit the menu screen.
2 Connect this unit and a printer.
A USB cable (not supplied)
≥ Insert the plugs as far as they will go.
[ ] indication appears.
≥ If the [
continues to flash, disconnect and then reconnect
the USB cable or check the printer, SD card and
settings on this unit.
3 Select a file to be printed, then press the joystick.
The number of pictures set is displayed.
204
LSQT1182
.
] indication does not appear or
SETUP] #
(SD)
A