Points Of Greasing - Denon DCD-CX3 Service Manual

POINTS OF GREASING

HANARL UD-321
TRAY bottom (Groove, Convex)
(0.5mg)
Inside Groove (Bottom, Wall)
TRAY bottom
Greasing position
Grease : EM30L
SLIDE SHAFT
Move HOUSING forward and apply it
to the backward all area. (17.0mg)
Greasing position
Grease : EM30L
CAM SPRING top
(SLIDE CAM contact area)
(0.9mg)
Greasing positions
Grease : EM30L
SLIDE CAM (Upper convex, Top)
(2.0mg each x 2)
SLIDE CAM
Convex area Grease : EM30L
Greasing positions
MECHA BASE bottom
CAM SPRING attachment area (0.9mg)
MECHA BASE bottom
About 5mm
Greasing position Grease : EM30L (2.0mg)
Grease : EM30L
Only shaft area of gear axis
(Not apply belt and pulley)
(2.0mg each x 2)
MECHA BASE
68
DCD-CX3
HANARL UD-321
Shaft all area
(0.2mg)
Greasing position
Grease : EM30L
Only around the gear (0.7mg)
(Not apply pulley)
HANARL UD-321
Shaft all area
(0.2mg)
Greasing position
Grease : EM30L
Shaft (2.0mg)
Greasing positions
Grease : EM30L
Both ends side of boss contact
area under BECA BASE-SLIDE CAM.
(7.0mg each x 2)
Grease : EM30L
Only shaft area of gear axis
(2.0mg each x 2)
Greasing positions
Greasing positions
Grease : EM30L
Boss all area
(2.0mg each X 4)
HANARL UD-321
Only gear contact area (0.7mg)
(Not apply belt and pulley)
Greasing position
Grease : EM30L
SPRING PLATE-STEEL BALL contact area
(0.9mg)