Setting Drc (Dynamic Range Compression) - Samsung HT-AS710 Instruction Manual

Setting DRC
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
REMOTE CONTROL
1
2
3
To exit setup mode
• Wait for about 5 seconds or press SETUP/MENU button.
"SETUP OFF" appears on the display and Setup Mode is exited.
Using the DRC button
Press DRC button.
• Each time you press this button, DRC : STD
in turn.
30
(Dynamic Range Compression)
√
Press SETUP/MENU button, and then press ENTER
button.
"SETUP MODE" appears on the display and goes into Setup Mode.
•
Press button to select the "DRC", and then press
ENTER button.
"DRC:STD" appears on the display.
...†
Press button to set the DRC.
• Each time you press this button, DRC : STD DRC : MAX
will be selected in turn.
DRC : MAX DRC : MIN will be selected
•
DRC : MIN
MAIN UNIT
1
Press SETUP button.
"SETUP MODE" appears on the display and goes into Setup Mode.
•
2
Press FUNCTION button to select the "DRC SETUP".
3
Press SURROUND button.
"DRC : STD" appears on the display .
•
4
Press SELECT( ) button to set DRC.
,
• Each time you press this button, DRC : STD DRC : MAX
will be selected in turn.
To exit setup mode
• Wait for about 5 seconds or press SETUP button.
"SETUP OFF" appears on the display and the unit Setup Mode is exited.
Setting DRC
STD : Sets DRC effect to standard.
•
MAX : Sets DRC effect to maximum.
•
• MIN : Sets DRC effect to minimum.
GB
DRC : MIN
31