Reverse Lockout Mechanism - Snapper SERIES G L T145H33GBV Safety Instructions & Operator's Manual

Section 2 - OPERATING INSTRUCTIONS
2.7. REVERSE LOCKOUT MECHANISM
Data indicates that tragic back-over accidents occur
each year. These accidents usually involve unsupervised
children. Many times these children have been given
rides on the machine and have been trained to view this
potentially dangerous piece of machinery as fun rather
than being taught how to avoid danger.
This riding mower has a Reverse Lockout Mechanism.
This mechanism prevents the mower from being shifted
into reverse with the blades running. To shift into reverse
you must first stop the blades and then shift to reverse. It
is our recommendation that this mechanism remain
functional and the operator of this equipment develop the
habit of never backing up with the blades running. As the
Safety Instructions Indicate, DO NOT operate blades in
reverse. STOP BLADES, LOOK AND SEE BEHIND
AND DOWN for children, pets and hazards before
and while backing.
We realize that this could cause a change to your
previous mowing method but we encourage you to adjust
to this new system. Do not defeat the Reverse Lockout
Mechanism.
If you operate your mower near roadways or use
attachments that require quicker shifting to reverse,
there is an override lever provided. This lever can be
pushed and held before starting the blades and will allow
reverse operation until the blade engagement lever is
moved to the "OFF" position, at which time the system
will return to its Reverse Lockout mode. This feature
should never be selected unless you are absolutely sure
that no children or others are present in the mowing area
and that all children are away and supervised by a
responsible adult.
2.7.1.
1.
2.
3.
4.
Reverse Lockout Mechanism Override
Stop machine. Stop blades.
Depress and hold Override Lever.
Raise blade engagement lever to "ON".
Release override lever.
WARNING
LOOK and SEE behind and down for children, pets
and hazards before and while backing.
IMPORTANT! DO NOT use the Reverse Lockout
Mechanism Override as the normal operating mode. To
return to the Reverse Lockout Mechanism mode, move
the blade engagement lever down to the "OFF" position.
The Override will reset to Reverse Lockout.
2.7.2. Check the Reverse Lockout Mechanism
Before each use, check the Reverse Lockout
Mechanism for proper function. Perform the following
check with the engine "OFF".
1. With engine "OFF", raise blade engagement
lever to "ON".
2. The Reverse Lockout Mechanism must
prevent the speed control lever from going into
reverse.
WARNING
DO NOT operate machine if Reverse Lockout
Mechanism is not functioning properly. Contact your
SNAPPER dealer immediately for assistance.
11