Canon Color Network Multi-PDL Printer Kit-C1 Service Manual page 201

F-3-274
13) Check to see that 'LPR' is indicated under [Protocol]. For [LPR Queue Name], 'lp' is automatically entered. Enter
the setting you have made for the iR C6800 (or the information you have collected) for [IP Address or Host Name];
then, click [OK] to go to step 14).
F-3-275
Note:
At this time, you need not directly type in [IP Address]; click [Browse] so that the appropriate information will
automatically be collected from the device, including the IP address.
1. Check [Protocol]; then, click [Browse].
Chapter 3
3-165