Canon BW UFRII LT PRINTER KIT-J2 Service Manual page 31

7) Mount the LAN cover [1].
- 4 TP screws (3x8) [2]
Points to Note When Attaching the LAN Cover
A grounding wire is fitted to the IP machine's IP PCB and IP cover. When attaching the LAN cover, be sure to remove the screw [1] from the wire, and tighten the
screw over both the wire and the LAN cover [2].
When mounting the LAN cover [1], take care so that the grounding plate [3] will not be bent by the LAN board [2].
Also, after mounting the cover, check to be sure that the grounding plate is in firm contact with the LAN board.
[1]
[2]
F-3-6
[1]
[2]
F-3-7
[2]
F-3-8
[2]
Chapter 3
3-3