Defining A Class; Defining A Traffic Behavior - HP FlexNetwork 6600 Configuration Manual

•
Defining a QoS policy
•
Applying the QoS policy

Defining a class

Step
1. Enter system view.
2. Create a class and enter
class view.
3. Configure match criteria.

Defining a traffic behavior

Configuring AF and the minimum guaranteed bandwidth
Step
1. Enter system view.
2. Create a traffic
behavior and enter
traffic behavior view.
3. Configure AF and the
minimum guaranteed
bandwidth.
You can apply this traffic behavior only to the outgoing traffic of an interface or ATM PVC.
Configuring EF and the maximum bandwidth
Step
1. Enter system view.
2. Create a traffic
behavior and enter
traffic behavior
view.
3. Configure EF and
the maximum
bandwidth.
Configuring WFQ
Step
1. Enter system view.
2. Create a traffic
behavior and enter
traffic behavior view.
3. Configure WFQ.
Command
system-view
traffic classifier classifier-name
[ operator { and | or } ]
if-match [ not ] match-criteria
Command
system-view
traffic behavior
behavior-name
queue af bandwidth
bandwidth
Command
system-view
traffic behavior behavior-name
queue ef bandwidth bandwidth
[ cbs burst ]
Command
system-view
traffic behavior
behavior-name
queue wfq
73
Remarks
N/A
By default, the and keyword is
used, and the relation between
match criteria is logical AND.
N/A
Remarks
N/A
The specified behavior name cannot be the
name of any system-defined behavior.
N/A
Remarks
N/A
The specified traffic behavior name
cannot be the name of any
system-defined behavior.
N/A
Remarks
N/A
The specified traffic behavior name cannot be
the name of any system-defined behavior.
N/A