Operating; Signal Output Delay; Test Function - Siemens SITRANS L Series Operating Instructions Manual

Operating

Note
The signal output and test options listed below apply only to specific power supply options.
3.1

Signal output delay

Universal voltage (DPDT) model
The signal output can be delayed and is adjustable from 0 to 30 seconds. Turn the
potentiometer clockwise to increase the delay time.
Potentiometer T1: Delay when output switches from fork covered to uncovered.
Potentiometer T2: Delay when output switches from fork uncovered to covered.
3.2

Test function

NAMUR model (IEC 60947-5-6) and 8/16 mA or 4 to 20 mA model
If the fork is uncovered, pressing this button will stop the vibration and the signal output will
switch to indicate a covered fork. You can test the vibration and the electronics without
removing the LVS200 from the vessel. If the fork is covered, pressing the button has no
effect.
SITRANS LVS100/200
Operating Instructions, 01/2019, A5E44839609-AA
3
9