Loading Of Motoplus Application (When Welder Is Froniustpsi) - YASKAWA YRC1000 Instructions Manual

HW1484216

2.5.7 Loading of MotoPlus Application (When Welder is FroniusTPSi)

2 Setup
2.5 System Configuration
Load FroniusTPSi and a MotoPlus application for communication.
1. Select {MotoPlus APL.} → {LOAD(USER APPLICATION)}.
At this time, select a device and a folder in which the execution file of
MotoPlus application (FroniusXML.out) is saved.
2. Select "FroniusXML.out" in the displayed folder(s). (When selected,
is added at the left of it.)
Press [ENTER] to confirm the setting.
A confirmation dialog box appears. Select {YES}.
2-16
HW1484216
27/79