To Prepare Your Product For Long-Term Storage; Technical Data - Husqvarna 120 Operator's Manual

To prepare your product for long-term storage

1. Disassemble and clean the saw chain and the
groove in the guide bar.
CAUTION: If the saw chain and guide
bar are not cleaned, they can become
rigid or blocked.
Engine
Cylinder displacement, cm
Idle speed, rpm
Maximum engine power acc. to ISO 7293, kW/hp @ rpm
1
Ignition system
Spark plug
Electrode gap, mm/in
Fuel and lubrication system
Fuel tank capacity, liter/cm
Oil tank capacity, liter/cm
Type of oil pump
Weight
Weight, kg
2
Noise emissions
Sound power level, measured dB(A)
Sound power level, guaranteed L
3
Sound levels
Equivalent sound pressure level at the operator's ear, dB(A)
Equivalent vibration levels, a
2
Front handle, m/s
1
Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.
2
Noise emissions in the environment measured as sound power (L
2000/14/EC.
3
Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent
sound pressure level is a standard deviation of 2.5 dB (A).
4
Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration
levels under various working conditions. Reported data for equivalent vibration level has a typical statistical
dispersion (standard deviation) of 1.5 m/s
26

Technical data

3
3
3
dB(A)
WA
4
hveq
2
.
2. Attach the transportation guard.
3. Clean the product. Refer to
for instructions.
4. Do a complete servicing of the product.
Husqvarna 120
35
2700-3300
0.5/0.67@5000
TORCH CMR7H
0.6/0.024
0.25/250
0.15/150
Automatic
4.4
109
111
99
6.7
) in conformity with EC directive
WA
Maintenance on page 18
1063 - 002 - 06.03.2019