Section 1 - Familiarization - Snapper HZT21481BV Safety Instructions & Operator's Manual

Section 1 - FAMILIARIZATION

BLADE SWITCH
CHOKE CONTROL
MOTION CONTROL
LEVER
RIGHT HAND FUEL
TANK
DECK LIFT LEVER
DISCHARGE
DEFLECTOR
DECK LIFT PEDAL
1.1 INTRODUCTION
This manual has been prepared for the operators of the
SNAPPER MID MOUNT ZERO TURNING HYDRO DRIVE.
Its purpose, aside from recommending standard operating
procedures and routine service requirements, is to promote
SAFETY through the use of accepted operating practices.
Read, Understand and Follow the IMPORTANT SAFETY
INSTRUCTIONS on Pages 2 thru 4 of this manual and All
SAFETY messages on the unit and its attachments before
operating. SNAPPER recommends returning the unit to an
authorized SNAPPER dealer annually for inspection and
addition of any new devices which might upgrade the safe-
ty of the mower.
HOUR METER
FIGURE 1.1
6
ENGINE SPEED
CONTROL
The figures and illustrations in this manual
are provided for reference only and may
differ from your specific model. Contact
your Snapper dealer if you have questions.
1.2 NOMENCLATURE
The nomenclature information above, Figure 1.1, shows
the essential parts of the unit. It is recommended that all
operators of this equipment become thoroughly familiar
with the controls, components, and operation of this
machine before operating. Specific details involving the
engine are found in the separate engine owner's manual.
Study these manuals before operating and keep both
handy for future reference. For the nearest SNAPPER
dealer in your area, check the yellow pages under the
heading LAWN MOWERS. For engine parts and service,
look for the engine manufacturer's dealers under the head-
ing, ENGINES - gasoline.
KEY SWITCH
MOTION CONTROL
LEVER
LEFT HAND FUEL
TANK
PARKING BRAKE
LEVER
CONTROL PANEL
(see inset)
IMPORTANT