The contents of this manual are subject to change without notice. Every effort has been made to ensure the accuracy of information presented in this manual. However, Canon Electronics Inc. and the subsidiaries on the back cover assume no responsibility for any errors or their consequences.
Using the Scanner Using the Scanner Switching On Use the procedure below to switch the scanner on. IMPORTANT If an FS Controller III is installed on the scanner, switch the FS Controller III on first. Press the “|” side of the power switch to turn on the main unit.
Using the Scanner Adjusting the Image The instructions below describe how to adjust the image projected onto the scanner screen. Note The image can be adjusted using the operation panel below the screen or the optional operation keyboard. Focusing the Image The image projected on the screen can be focused either automatically (Auto Focus) or manually.
Using the Scanner Enlarging and Reducing the Image Press the ZOOM key. ZOOM key Turn the image adjustment control knob to enlarge or Control knob reduce the image. Turn the knob to the left to enlarge the image and to the right to reduce it. •...
Using the Scanner Printing or Scanning the Image In Reader Printer mode, the image projected on the scanner screen can be printed directly to a FilePrint 400 printer connected to the scanner. In Scanner mode, the image can be downloaded as image data to a computer connected to the scanner and then printed on a printer connected to the computer.
Using the Scanner Brightness Adjustment Use the procedures described here to adjust the image brightness during scanning or printing. The brightness can be adjusted either automatically (AE) or manually. Automatic adjustment Press the AE key on the operation panel or the operation keyboard (sold separately).