THANK YOU FOR BUYING A RYOBI PRODUCT. DESCRIPTION To ensure your safety and satisfaction, carefully read through 1. On/ Off slide switch with operating-mode selector this OWNER’S MANUAL before using the product. 2. Aluminium base 3. Spirit level for vertical alignment General Safety Rules 4.
Page 6
Do not subject the measuring tool to extreme temperatures HORIZONTAL ALIGNMENT (Fig. 3-4) or variations in temperature. As an example, do not leave The laser line aperture must be horizontal and the aluminum it in vehicles for longer periods. In case of large variations in base of the measuring tool must face downward.
Point operation: Place the wall mount base via ¼’’ tripod mounting hole (14) onto the 1/4” male thread of the tripod and screw the locking screw of the tripod tight. Align the tripod roughly. When working without tripod, place the wall mount base on a surface that is as horizontal as possible.