Table of Contents
Advertisement
Section 2 - OPERATING INSTRUCTIONS
2.9 INSTALLATION of DISCHARGE DEFLECTOR
(Optional accessory on some models)
1. Remove front and rear nuts attaching recycling
cover to deck. Remove recycling cover. See Figure
2.10.
2. Install discharge deflector and secure to deck
using hardware removed in Step 1. Slot in front
edge of discharge deflector must be under nut as
shown and both bolts protruding through holes in
the side of the deflector. See Figure 2.11.
REMOVE NUTS
FIGURE 2.10
FRONT EDGE OF
DEFLECTOR UNDER
NUT
FIGURE 2.11
NUT
9
Advertisement
Table of Contents
