US Robotics MAXg User Manual page 19

Wireless MAXg PC Card and PCI Adapter User Guide
MAXg Router.
IV. Connect the antenna to the Wireless MAXg Router.
V. Connect the power adapter to the Wireless MAXg Router and to
a standard wall power outlet. Make sure your computer is
turned on.
Note to UK Users: Attach the correct power plug to the power
adapter.
Note: Some cable or DSL modems can be connected using either
a USB cable or an Ethernet cable. To connect your cable or DSL
modem to the Wireless MAXg Router, you must use an Ethernet
cable.
Step Two: Install the Wireless MAXg PC
Card and drivers
I. Locate an available PC Card slot and fully insert the Wireless
MAXg PC Card. PC Card slots are typically on the side of laptops.
You should hear a beep when the Wireless MAXg PC Card is fully
inserted and detected.
II. When Windows detects the new hardware, click Cancel. Insert
the Installation CD-ROM into your CD -ROM drive. The
Installation CD Graphical User Interface (GUI) will appear on
your screen. If prompted, select your preferred language.
Note: If your CD-ROM does not automatically launch, click
Windows Start, Run, type D:\setup (if your CD-ROM drive
uses a different letter, type that letter in place of "D"), and
file://D:\Data\USR\Certificate%20document\G-Force%20PC-PCI%20User%20Guide%2012...
第 2 頁，共 7 頁
2004/12/20