Program Tracks; Control Play - Philips AZ1068 User Manual

Hi
MIC
VOL
LO
Tip
•
To avoid echo noise, disconnect the microphone, or
turn off the microphone, or put the microphone away
from the device if not use it.
•
Different microphones may have different sound quality
due to sensitivity.

Program tracks

In CD/USB/SD mode, you can program a
maximum of 20 tracks.
1
to stop play, and press PROG to
Press
activate the program mode.
» [PROG] (program) starts to blink.
2
For MP3 tracks, press ALBUM +/- to select
an album.
3
Press / to select a track number,
and then press PROG to confirm.
4
Repeat step 3 to program more tracks.
5
Press to play the programmed tracks.
» During play, [PROG] (program) is
displayed.
• To erase the program, at the stop
position, press .

Control play

VOLUME
Rotate to adjust volume.
Stop play.
Pause or resume play.
/
Press to select previous/next track.
Press and hold to fast backward/
forward in a track.
PROG
In CD/USB/SD mode, program
tracks.
MODE Select a play mode.
[ ] (repeat): Repeat a track.
[ ALB] (repeat album): Repeat
an album.
[ ALL] (repeat all): Repeat an
entire CD/program.
[ ] (shuffle): Play tracks
randomly.
To return to normal play, press
MODE repeatedly until the repeat
icons disappear.
-ALBUM+ Select previous/next album.
Tip
•
When search reaches the end of the last track, the CD
stops.
•
Shuffle play cannot be selected when you play
programmed tracks.
EN 9