Phone Numbers With Pauses; Storing A Number With Pauses; Adding A Pause To An Existing Number - LG RD6500 User Manual

RD6500.qxd 1/10/06
CONTACTS IN YOUR PHONE'S MEMORY

Phone Numbers with Pauses

When you call automated systems such as voice mail
or credit billing numbers, you often have to enter a
series of numbers. Instead of entering these numbers
by hand, you can store the numbers in your Contacts
separated by special pause characters (P, T). There
are two different types of pauses you can use when
storing a number:
Hard Pause (P)
The phone stops dialing until you press Left Soft key
[Release] to advance to the next number.
2-sec Pause (T)
The phone waits 2 seconds before sending the next
string of digits.

Storing a Number with Pauses

1. Press Left Soft Key
2. Press [Contacts] .
3. Press [New Number] .
4. Enter the number.
5. Press Right Soft Key
34
3:05 PM Page 34
[Menu] .
[Pause] .
5. Use to select pause type and press
Hard Pause / 2-sec Pause
6. Enter additional number(s) (e.g., pin number or
credit card number), then press
7. Use to select the Label and press
8. Enter a name (up to 22 characters) and press
A confirmation message is displayed.

Adding a Pause to an Existing Number

1. Press Right Soft Key [Contacts] .
2. Use to highlight the Contact entry to edit
and press , then press Left Soft Key
3. Use to highlight the number, then press
4. Press Right Soft Key [Pause] .
Hard Pause / 2-sec Pause.
6. Enter additional number(s), then press
7. Use to confirm the Label, then press
A confirmation message is displayed.
Note
Press Right Soft key to see entire entry.
.
.
.
.
[Edit] .
.
.
.