Advertisement
1
Install batteries
A
2
Plug in the USB receiver
A
The wireless connection is made automatically
30 ft or 10 m max.
In line of sight
No direct line of sight required
B
B
2
Battery indicator
Once batteries are installed and a wireless connection is made, the green LED will stay solid for
5 seconds at start up. If there is connection but the battery is weak, the LED will flash red for 5
seconds. If the battery gets weak in the middle of use, the LED will also flash red.
LED will also light up when the Receiver is removed from the mouse to start up.
Note: Please use fresh non-rechargeable alkaline batteries. We recommend that you use same
brand of batteries.
3
Install the Driver Software
For PC Users - this driver will allow you to have 4 way tilt scroll control
For Mac Users - this driver will allow you to use the D-Pad under the mouse to control iTunes
Jogball Functionality
This is a 2 Button Mouse with a jogball for 360 degrees scroll (Driver is required for this
functionality). Rolling this jogball scrolls the document on screen. The Mouse shuts down
when the dongle is stored inside it.
3
Advertisement
