Table of Contents
Advertisement
Default destination: store a default destination
number. It will be displayed in the Destination
field.
Default type: set the default message type. The
network can convert the messages into the
selected format.
Default validity: set the length of time your
messages are stored in the SMS server.
Setting name: change the name of the setting
group.
•
Common settings: the following options are
available:
Reply path: allow recipients to reply to you
through your SMS server.
Delivery reports: set the network to inform you
when your messages have been delivered.
Bearer selection: select either GSM or GPRS
preferred, depending on your network.
Character support: select a character encoding
type. If you select Automatic, the phone switches
the encoding type from GSM-alphabet to Uni-code
if you enter a uni-code character.
Use of uni-code encoding will reduce the maximum
number of characters in a message to about half. If
this menu is not shown, your phone provides the
automatic character encoding by default.
Delete all
(Menu 5.1.7)
Use this menu to delete SMS messages in each
message folder all at once.
1. Press [
] to select the message folders to be
OK
cleared.
2. Press <Delete>.
3. Press <Yes> twice to confirm the deletion.
Memory status
(Menu 5.1.8)
Use this menu to check the amount of memory
currently in use in each message folder.
39
Advertisement
Table of Contents
