Table of Contents
Advertisement
"Enter PUK"
•
The PIN code has been entered incorrectly three times
in succession, and the phone is now blocked. Enter the
PUK supplied by your service provider.
"No service," "Network failure," or "Not done"
displays
•
The network connection has been lost. You may be in a
weak signal area. Move and try again.
•
You are trying to access an option for which you have
no subscription with your service provider. Contact the
service provider for further details.
You have entered a number but it was not dialled
•
Be sure that you have pressed [
•
Be sure that you have accessed the right cellular
network.
•
Be sure that you have not set an outgoing call barring
option.
Your correspondent cannot reach you
•
Be sure that your phone is switched on. ([
for more than one second.)
•
Be sure that you are accessing the correct cellular
network.
•
Be sure that you have not set an incoming call barring
option.
Your correspondent cannot hear you speaking
•
•
The phone starts beeping and "Battery low"
flashes on the display
•
The audio quality of the call is poor
•
].
•
No number is dialled when you re-call a
Phonebook entry
•
] pressed
•
Be sure that you have switched on the microphone.
Be sure that you are holding the phone close enough
to your mouth. The microphone is located at the
bottom of the phone.
Your battery is insufficiently charged. Recharge the
battery.
Check the signal strength indicator on the display
(
). The number of bars indicates the signal
strength from strong (
Try moving the phone slightly or moving closer to a
window if you are in a building.
Use the Contact list feature to ensure the number has
been stored correctly.
Re-store the number, if necessary.
) to weak ( ).
89
Advertisement
Table of Contents
