Sagem MyCK100 User Manual

MyCK100 handsfree kit User Guide
Introduction
MyCK100 handsfree kit is a handsfree kit based on Bluetooth® technology.
Bluetooth® technology is a standard for wireless, short range communication. Devices such as a
handsfree kit and a mobile phone can communicate together without wires within an approximately 10 m
radius.
MyCK100 handsfree kit is a Bluetooth® approved handsfree kit, in accordance with 1.2 revision of
Bluetooth® protocol. Two profiles are supported: headset & handsfree, so devices supporting either
headset or handsfree profile can be used with this handsfree kit.
In order to check compatibility of Bluetooth® devices with MyCK100 handsfree kit, please log on to:
www.sagem.com/mobiles.
This guide focuses on MyCK100 handsfree kit usage with Bluetooth® mobile phone, which is the most
common application.
Your MyCK100 handsfree kit allows you to receive phone calls, make phone calls (if your handset
supports voice-activated features) and set up call volume and ring volume directly on your handsfree kit.
MyCK100 handsfree kit is fitted with the following keys below:
•
A main push button
•
A volume cutting wheel
• A microphone cutting wheel
•
Two buttons button 1 (Logo ON/OFF) and button 2 (Logo Mute) (These buttons are used for
pairing etc...)
Before starting using MyCK100 handsfree kit, you should charge the handsfree kit 's battery; please refer
to the section Charging MyCK100 handsfree kit of this guide.
Before pairing the MyCK100 handsfree kit with a mobile phone please refer to the section Pairing of
MyCK100 Bluetooth handsfree kit of this guide.
Box content
Please make sure that in addition to this guide you have:
- MyCK100 handsfree kit,
- 3 clips,
- Charger,
- Charging Adapter,
- A soft bag