AEG SANTO Series Operating Instructions Manual page 11

0 Reposition upper pivot pin to the
left side.
0 Carefully push refrigerator door
onto upper pivot pin and close.
0 Slide the centre door bearing into
the bottom left of the fridge com-
partment door and fasten to the
housing.
0 Carefully slide the freezer com-
partment door onto the centre
bearing pivot and close.
0 Place the lower door bearing in
the bearing pivot of the freezer
compartment door and fasten.
0 Move the door handles from the
left to the right and cover the
remaining holes with the hole
cover pins attached.
0 Fit the plinth again.
Changing Over The Door Hinges
41