AEG SANTO 70298-8 DT Operating Instructions Manual page 28

- Remove the upper plastic plug of the
freezer door and reinsert on the oppo-
site side.
- Remove the upper plastic plug of the
refrigerator door and reinsert on the
opposite side.
G
- Unscrew the upper hinge pivot (G) of
the refrigerator and rescrew it on the
opposite side.
- Remove with a tool the cover (e)
unscrew the lower hinge pivot (F) and
rescrew on the opposite side
- Refit the cover (e) on the opposite
side.
- Insert the middle hinge pivot into
hole on the left of the refrigerator
door.
- Insert the refrigerator door on the
lower hinge pivot (f) .
- Insert the freezer door on the upper
hinge pivot and tilt slightly the doors
and insert the middle hinge pivot into
the hole on the left side of the freezer
door.
- Opening the doors, fix the middle
hinge on the left side with two screws.
Do not forget the plastic spacer that
must be placed under the middle hin-
ge (H).
Pay attention that the border of the
doors are parallel to the top border.
Reposition, level the appliance and
connect it to the mains socket.
28