Advanced Bios Features - MSI MS-7380 Getting Started

M S-7380 M ainboard

Advanced BIOS Features

Boot Sector Protection
W hen you enable this item and someone attempt to write data into this area, BIOS will
show a warning message on screen and it will alarm beep.
Full Screen LOGO Display
This item enables you to show the company logo on the bootup screen. Settings are:
[Enabled]
[Disabled]
Quick Power On Self Test
Select [Enabled] to reduce the amount of time required to run the power-on self-test
(POST). A quick POST skips certain steps. We recommend that you normally disable
quick POST. Better to find a problem during POST than lose data during your work.
Boot Up Num-Lock LED
This setting is to set the Num Lock status when the system is powered on. Setting to
[On] will turn on the Num Lock key when the system is powered on. Setting to [Off]
will allow users to use the arrow keys on the numeric keypad.
ACPI Function
This item is to activate the ACPI (Advanced Configuration and Power Management
Interface) Function. If your operating system is ACPI-aware, such as Windows 98SE/
2000/ME, select [Enabled].
3-8
Shows a still image (logo) on the full screen at boot.
Shows the POST messages at boot.