Electrolux ENN 26800 Instruction Book page 12

Instructions for totally built-in
appliances
Door reversal
The appliance is supplied with the right
or left door opening. To change the opening
direction of the door proceed as in the
following instructions before installing it.
1. Unscrew the upper pin and remove the spacer
2. Remove the upper door
3. Unscrew the middle hinge and refit them on
the opposite side
4. Refit the upper door, the upper pin and the
spacer on the opposite side
5. Unscrew the lower pin and remove the spacer
and refit them on the opposite side
Recess dimensions
Height (1)
Depth (2)
Width (3)
To ensure adequate ventilation, allow the clearances
shown in figure.
Furthermore, it is necessary that the cabinet has a
ventilation recess with the following dimensions:
depth 50 mm
width 540 mm
12
1780 mm
550 mm
560 mm
S
min.
50 mm
2
200 cm
D567
3
2 1
PR01
min.
200 cm
2