Table of Contents
Advertisement
Menu functions
•
Show caller ID: set the phone to
display missed call notifications with the
most recently missed caller's
information.
•
Call status tones: select the various
tones on the phone you want to turn on
or off:
Call connect tone: cause the phone to
beep when a call is connected to the
system.
Minute minder: cause the phone to
beep every minute during an outgoing
call to keep you informed of the length of
your call.
Call end tone: cause the phone to beep
when a call is disconnected by the other
person or the faded signal.
•
Alerts on call: set the phone to beep
when you receive a new message or
when the time for an alarm comes during
a call.
102
Voice call
(Menu #.5.2)
Use this menu to access network services for
voice calls.
Setting a call diverting option
This network service reroutes incoming calls
to a different phone number that you
specify.
1. From the Voice call screen, select Call
diverting.
2. Select a call diverting option:
•
Always: divert all calls.
•
If busy: divert calls when you are on
another call.
•
If no reply: divert calls when you do
not answer the phone.
•
If out of reach: divert calls when
you are not in an area covered by
your service provider or when your
phone is switched off.
•
Cancel all: cancel all call diverting
options.
3. Enter the number to which the calls will
be diverted in the Divert to line.
Advertisement
Table of Contents
