Placing Calls; Place An Outside Call; Place An Intercom Call - NEC SL2100 User Manual

Placing Calls

 Place an Outside Call <Quick Access>
Trunk Key
 Listen to the Dial Tone before dialing a Telephone Number.
 You can have function keys for Trunks or Trunk Groups. Ask your NEC Authorized Supplier for the details.
 Place an Outside Call <Access by Code>
Trunk Access Code
Speaker
9
8
#
 To change the Trunk Access Code, Ask your NEC Authorized Supplier for the details.
 Listen to the Dial Tone before dialing a Telephone Number.
 In case the number of Trunk Group is more than 10, you should enter 2 digits (e.g. 11 : Group 11) after
dialing "804". Ask your NEC Authorized Supplier for the details.
 For the dial digit of Trunk No., ask your NEC Authorized Supplier for the details.
 Place an Intercom Call <Dial Access>
Speaker
 Your call will ring or voice-announce. If you hear ringing, wait for an answer. If you hear a beep, begin
speaking. Dialing "1" changes voice/ring mode. (in case the destination is Multi-line Terminal)
Telephone Number
? ? ?
0
Trunk Group No.
0 4
9 # 0
Extension Number
? ? ?
?
?
Trunk No.
? ?
(e.g. : 005 = Trunk No.5)
5
Telephone Number
? ?
?
?