Wiring Diagram - Makita KP0810 Technical Information

W
iring diagram
KP0810
Fig. D-3
If Noise suppressor is used
put in this portion.
Noise suppressor
(if used)
KP0810C
Fig. D-4
Put Pickup coil and Controller
in place as illustrated below.
If Noise suppressor is used
put in this portion.
Noise suppressor
(if used)
Controller
Handle (L)
Switch
rib
Lead wire
holder
Route three Field lead wires under the rib,
then fix two Field lead wires to Switch with Lead wire holder.
Handle (L)
Switch
Pickup coil
rib
Lead wire
holder
Route the following Lead wires under the rib:
Then fix the following Lead wires with Lead wire holder:
Route Field lead wires through
these portions of Housing.
Route Field lead wires through
these portions of Housing.
three Field lead wires
two Lead wires from Controller to Pickup coil
two Field lead wires to Switch
two Lead wires from Controller to Pickup coil
P 11/11
Housing
Brush holder
Housing
Brush holder