General ...............................................................2
Setting Up ...........................................................2
Safety Decals ......................................................5
General ...............................................................6
Chipper Cone ......................................................6
Handle.................................................................7
Hopper ................................................................7
Discharge Bag.....................................................7
Engine Oil............................................................7
MODEL IDENTIFICATION
Record your model number, manufacturer number and
serial number in the space provided for easy reference.
The model and manufacturer numbers can be found on
the unit I.D. plate. Refer to the Engine Owner's Manual
for location of engine serial number.
If you have a service problem requiring special assis-
tance and cannot contact a local dealer to help, call the
Customer Service Department at 414-284-8786.
You must read, understand and comply with all
safety and operating instructions in this manual
before attempting to set-up and operate your
chipper/shredder.
Failure to comply with all safety and operating
instructions can result in loss of machine control,
serious personal injury to you and /or
bystanders, and risk equipment and property
damage. The triangle in the text signifies impor-
tant cautions or warnings which must be fol-
lowed.
WARNING
Description ........................................................10
Site Location .....................................................10
Start-Up .............................................................11
Shutting Down...................................................13
Schedule ...........................................................15
STORAGE...............................................................19
Repair................................................................21
MODEL REFERENCE
Model Number:
Manufacturer Number:
Engine I.D. Number:
Dealer Name/Date Purchased:
Upon start-up and shut down, you may hear the
metal-to-metal sound of the triangular hammers and J-
hammers positioning themselves on the rotor. This is a
normal sound. If this sound continues after the
machine obtains full speed, please contact your dealer
for an inspection of your chipper/shredder.
Engine exhaust from this product contains chem-
icals known, in certain quantities, to cause caner,
birth defects, or other reproductive harm.
1
Table Of Contents
NOTICE
WARNING