Table of Contents
Advertisement
LG Electronics Inc.
I. Booting
-
Press and hold the Power/Call button on the front panel for 2 seconds. The power is turned on as the booting tone
is played.
-
The LED will flicker in red.
-
When there is no operation for 20 seconds, the headset enters the Power Saving mode.
II. Shut down
-
Press and hold the Power/Call button for 5 seconds. As the shutdown tone is played, all the functions halt, the
Bluetooth link is disconnected, and the power is turned off.
III. Charging
-
Connect the charger to the connecter on the side of the headset to charge the headset.
-
When the charger is connected with the power on, the Headset will be powered off. And while charging, the LED
keeps lighting on until the Headset is fully charged.
-
When recharging is complete, the LED goes out even with the charger connected.
IV. Pairing
-
When the Headset is power off, press and hold the Power/Call button for at least 6 seconds to enter Pairing Mode.
When the Headset enters Pairing Mode, the LED is steadily on and the headset generates Melody sound. Pairing
Mode keeps going on for 3 minutes. If there is no connection for 3 minutes, Headset will be turned off
automatically. When the Bluetooth phone searches for connected devices, select Headset and register it.
-
If you want to pair with other devices in the future, you must search for devices with the headset in the Pairing
Mode.
-
When the pairing is complete, the headset will generate a tone and indicate that the device has been successfully
registered.
-
After the pairing is successfully made, the headset enters the Waiting mode and waits for the other device to make
a connection. If a connection fails, press the Power/Call button on the headset or use functions of the phone to
make a connection.
4
Advertisement
Table of Contents
