Denso BHT-470BWB-CE Operator's Manual page 31

Adjusting the beeper and switching the beeper and vibrator
Choosing "2:Beeper/Vibration"
setting menu calls up the screen shown at left.
On this menu, you can adjust the beeper volume
and switch the beeper and vibrator.
Choosing the Volume tab calls up the screen
shown at left.
You can adjust the beeper volume to six levels from
0 to 5. The greater the value, the higher the beeper
volume.
Choosing the Rumble Device tab calls up the
screen shown at left.
You may select any of three ways--beeping only,
vibrating only, and combination of beeping and
vibrating as a confirmation of completion of bar
code reading.
Beeper: Beeping only
Vibration: Vibrating only
Beeper/Vibration: Beeping and vibrating
31
on the Device