Introduction; Specification; Precautions - Zte CDMA2000 1X EV-DO User Manual

Wireless data terminal
Hide thumbs Also See for CDMA2000 1X EV-DO:
Table of Contents

Advertisement

1. Introduction

Thank you for choosing MG478/AC8700 CDMA2000 1X EV-DO Wireless Data Terminal
(hereinafter referred to as Data Terminal) of ZTE Corporation.
The Data Terminal equips with a standard USB interface and supports both CDMA2000 1X
EV-DO and CDMA2000 1X network. In the area where there is signal, it allows you to go surfing
on the Internet, browse the web pages, and send & receive Emails

2. Specification

Parameter
Transmitting Frequency
Receiving Frequency
Stability
Dimensions ( L × W ×H)
Weight
Data Rate
Current
Current Consumption
Transmitting Power

3. Precautions

Please don't use the product near flammable or explosive materials because it might cause
failure or fire.
Keep the product away from high temperature, humidity, or dust because it might cause
failure.
Avoid shock, cast or impact. Please keep the product well when you don't use it.
Do not dismantle or disassemble the product at will or revolve the antenna frequently. Our
company will not provide warranty service for the damage caused by abnormal operations.
Don't use the product near the place where is weak signal or high-precision electronic device
because the magnetic interference might cause the misoperation of electronic device or other
problems.
Please don't insert or pull out the card with great force to avoid damaging the interface.
ZTE Corporation
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
Model
MG478
452.625-456.850MHz
462.625-466.850MHz
Fc±300Hz
80 mm ×36 mm×12.8mm
38.7g
Max. down-link transmission rate: 2.4Mbps,
Max. up-link transmission rate: 153Kbps
5V using USB interface supply
Sleep: 5mA
224mW
AC8700
824-849MHz
869-894MHz
Max.: 480mA
http //www zte com cn

Advertisement

Table of Contents
loading

Table of Contents