Some Useful Hints; Guarantee; Service And Spare Parts; Technical Data - Dometic RM 4203 Manual

installation as well as the connect flue oulets are to be
checked every two years by an expert (this has to be
arranged by the person responsible).

SOME USEFUL HINTS

Make sure that:
The refrigerator is not operating on 12 V when the ve-
hicle is parked, otherwise you will drain the car battery in
a short time.
Defrosting is carried out periodically.
The refrigerator is clean and dry with the door left open
when it is not to be used for some time.
Liquids or items with a strong odour are well packa-ged.
The ventilation openings are unobstructed.
The door is secured by means of the travel catch when
the caravan is on the move.
Only one mode of operation at a time is used to run the
refrigerator.

GUARANTEE

The refrigerator is guaranteed for one full year on condition
that it is used in a correct manner and in accordance with
these operating and installation in-structions.
It is also embraced by a European guarantee as described
in the brochure supplied with the refrigerator.

SERVICE AND SPARE PARTS

Service and spare parts are obtainable from your dealer or
DOMETIC - consult the yellow pages of the telephone
directory.
TECHNICAL DATA RM 4203
Overall dimensions
Height (incl. controls) . . . . . . . . . . . . . 606 mm
Width . . . . . . . . . . . . . . . . . . . . . . . . . 486 mm
Depth (incl. cooling unit)
without door. . . . . . . . . . . . . . 440 mm
with door. . . . . . . . . . . . . . . . . 480 mm
Build-in dimensions
Height . . . . . . . . . . . . . . . . . . . . . . . . . 610 mm
Width . . . . . . . . . . . . . . . . . . . . . . . . . 490 mm
Depth . . . . . . . . . . . . . . . . . . . . . . . . . 460 mm
Capacity
gross . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 lit
net . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 lit
frozen food compt.. . . . . . . . . . . . . . . . . . . . 6 lit
Weight (whithout packaging). . . . . . . . . 21 kg
Electrical data
Input 230 V . . . . . . . . . . . . . . . . . . . . . 105 watt
12 V . . . . . . . . . . . . . . . . . . . . . . . . 100 watt
Energy consumption/24 hours . . . . .2.3 kWh
Lp gas data
Input (max) . . . . . . . . . . . . . . . . . . . . . 186 watt
ditto, low flame . . . . . . . . . . . . . . . . . . . 86 watt
Energy consumption/24 hours
max . . . . . . . . . . . . . . . . . . . . . .0.35 kg
mid . . . . . . . . . . . . . . . . . . . . . . .0,24 kg
min . . . . . . . . . . . . . . . . . . . . . . .0.16 kg
Cooling medium . . . . . . . . . . . . . . Ammonia (R 717)

INSTALLATION INSTRUCTIONS

REPOSITIONING THE HINGES

The door hinges can be moved to the opposite side in the
following way:
Unscrew the upper hinge pin, taking care not to lose the
set of washers and bushes.
Lift the door from the lower hinge pin.
Unscrew the pin and mount it on the opposite side hinge.
Unscrew the travel catch and mount it on the opposite
side.
Carefully prise out and exchange the plastic inserts in the
holes for the tarvel catch in the upper door frame. (fig.
10)
Fit the door on the pin and reassemble the pin with
washers and bushes in its new position.
Check that the door closes properly and seals all round.

DOOR PANEL

The door panel can easily be mounted or changed. The
dimensions of the panel must be:
Height . . . . . . . . . . . . . . . . . . . . . . . . . 532 mm
Width . . . . . . . . . . . . . . . . . . . . . . . . . 453 mm
Thickness. . . . . . . . . . . . . . . . . . . . max 3,8 mm
Remove the door, see REPOSITIONING THE HINGES.
Remove the lower trim moulding and then withdraw the
panel by sliding it downwards.
Fit the new panel in place and slide it up as far as
possible.
Fit the trim moulding back in place.

INSTALLATION/BUILDING-IN

Installation in open air applications.
(Under an awning, on a veranda, etc.)
Place the refrigerator protected from rain, direct sun
exposure and strong draught.
The location should be cool and with good air circulation
to avoid concentration of the flue gases. The ventilation
opening at the top of the refrigerator must not be co-
vered.
Place the refrigerator on a sturdy base so that it does not
tipp over when its door is opened.
The base must be level. Check with a water level and
adjust if necessary.
Installation indoors
The room should have a capacity (lenght x width x height)
3
of at least 20 m and have a window (wich can be opened)
or a door to the outside.
It is important that the refrigerator is not subject to heat
radiation from a stove etc.
10