i-mate Pam User Manual page 63

and increase network security. To run Wireless LAN on your device, you need access to broadband Internet, and the necessary access point or router that emits
WLAN signals. If you do not have access to broadband Internet, consult your ISP before you try to run this utility. However, the availability and range of your
device's WLAN signal depends on the number, infrastructure, and other objects through which the signal passes.
☺ Note: You can activate Bluetooth on your device and communicate with other Bluetooth enabled devices. To communicate, make sure you have another
device with Bluetooth activated on it, which is within the close range of your device (within 10-meter range).
To activate a second generation network like GPRS on your device and communicate with other devices on the network, you need to have a
SIM or USIM card installed on your device.
Check for a Wireless LAN signal
Before you start a Wi-Fi connection, verify that your device has access to a Wireless LAN channel signal. You can check the current wireless connection status
from the following three screens of your device.
• Today screen. If your device detects a WLAN network connection, the WLAN connection icon appears at the top of the Today screen and a "W" icon appears at
the bottom-right corner of the screen.
• Wireless LAN Main screen. The current connection status and signal quality for each specific wireless channel appears on the Wireless LAN Manager screen
with the current configuration.
• Configure Wireless Networks screen. This screen displays the wireless networks currently available and allows you to add new ones if available.
63