Answering A Call; Speakerphone; Caller Id; 3-Way Calling - Pantech CDM-8935 User Manual

BASIC OPERATION
H ANSWERING A CALL
When your phone rings or vibrates, press
incoming call. (Depending on your phone's settings, you may
also answer incoming calls by opening the phone or by pressing
any number key.)
To ignore incoming calls and silence the ringer, press
[IGNORE].
To end the call, press .
H SPEAKERPHONE
The speaker phone feature lets you hear audio through the speaker and
talk without holding the phone.
To activate the speakerphone in idle, answering or calling
modes, press .
The phone returns to normal (Speakerphone Off) after ending
a call or when the phone is turned off and back on.
H CALLER ID
Identifies callers by displaying their phone number.
If the caller's name and number are already stored in your phone
book, the name will be displayed.
The caller ID information is stored in Recent Calls.
22
BASIC FUNCTIONS
to answer the
BASIC FUNCTIONS
H 3-WAY CALLING
With 3-Way Calling, you can talk to two people at the same time. When
using this feature, normal airtime rates will apply to both of the calls.
NUMBER NUMBER
Enter a number you wish to call and press
Once you have established the connection, enter the second
number you wish to call and press
When you're connected to the second party, press
to begin your 3-Way call.
If one of the people you called hangs up during your call, you
and the remaining caller stay connected.
If you initiated the call and are the first to hang up, all three
callers are disconnected.
H CALL WAITING
Notifies you of an incoming call when you are already on a call by
sounding a beep tone and displaying the caller's phone number.
To answer another call while on the phone, press
This places the first call on hold. To switch back to the first caller,
press again.
BASIC OPERATION
.
.
again
.
23