BASIC FEATURES
Selecting Pitch
There are three pitches available for typing the
change the typing pitch. When the typewriter is turned on. PICA mode is selected.
The selection sequence is the following:
PICA
ELITE
The chosen pitch will be displayed.
PICA
(10) : 10 characters per inch
ELITE (12) : 12 characters per inch
MICRO (15) : 15 characters per inch
Selecting Line Spacing
There are three line spacing settings availble - 1, 1 1/2, 2.
The
+ (LINE SPACE) key is used to select line spacing.
CODE
The default mode is single (1) when the typewriter is turned on.
The selection sequence is the following:
1
1 1/2
The chosen line spacing will be displayed.
Setting Impression
You can choose one of three hammer impression levels - Light, Medium and Heavy.
The
+
(IMP) key is used to set the impression level.
CODE
2
The Light level is selected initially.
The selection sequence is the following:
Light
Medium
The chosen impression level will be displayed.
Setting Margins
You may freely adjust the margins. The minimum distance between the left and right
margins is one inch.
• Left Margin
Move the carrier to the desired left margin position and press the
• Right Margin
Move the carrier to the desired right margin position and press the
key.
MAR R
MICRO
PICA
2
1
Heavy
Light
8
-7-
+
(PITCH) key is used to
CODE
4
key.
MAR L
+
CODE