Error Messages - Sony HDC2500 Operation Manual

Cable (for example)
Fujikura 8.5-mm dia.
Fujikura 14.5-mm dia.
Belden 9232 13.2-mm dia

Error Messages

If a problem occurs during operation, a warning message is
displayed.
Note
To display a message, set the DISPLAY switch to DISPLAY or
MENU.
Message
TEMP WARNING
FAN STOP
SET CORRECT SYSTEM DATE The time/date of the internal
OHB BLOCK NG!
MSU RPN BUSY
VF RPN BUSY
NO USB FLASH DRIVE
USB FLASH DRIVE ERROR
FORMAT ERROR!
WRITE PROTECTED
FILE ERROR
OTHER MODEL'S FILE
FILE NOT FOUND
Max. distance Min. distance
700 m (2297 ft) 50 m (164 ft)
1400 m (4593 ft) 100 m (328 ft)
1000 m (3281 ft) 75 m (246 ft)
Meaning
The internal temperature is
abnormally high.
The built-in fan is not rotating
properly.
clock have not been set.
A problem is detected in the
optical block.
RPN compensation was
attempted using the camera
menu while being operated from
an external device.
Consult Sony service personnel.
RPN compensation was
attempted from an external
device while being operated
using the camera menu.
Consult Sony service personnel.
A USB drive operation was
attempted with no USB drive
connected.
An error occurred during access
to a USB drive.
A USB drive operation was
attempted with an unformatted
USB drive.
File writing was attempted with a
write-protected USB drive.
An error occurred while reading
a file from a USB drive.
You attempted to read a file of
other models having no
compatibility.
The file you attempted to read
does not exist in the USB drive.
71