Honeywell Lyric SIXPIR Quick Installation Manual

PLEASE SEE BOTTOM OF PAGE FOR FCC/IC AGENCY STATEMENTS
This wireless passive infrared motion
sensor is intended for use with
Honeywell controls that support SiX™
series devices.
FC: This wireless passive infrared
motion sensor is intended for use
with Honeywell controls that support
SiX™ series devices.
SP: This wireless passive infrared
motion sensor is intended for use
with Honeywell controls that support
SiX™ series devices.
PA: This wireless passive infrared
motion sensor is intended for use
with Honeywell controls that support
SiX™ series devices.
NOTE: Once enrolled, the sensor
cannot be used with another system
until it is removed from the current
controller. See the controller's
instructions.
FC: NOTE: Once enrolled, the sensor
cannot be used with another system
until it is removed from the current
controller. See the controller's
instructions.
SP: NOTE: Once enrolled, the sensor
cannot be used with another system
until it is removed from the current
controller. See the controller's
instructions.
PA: Once enrolled, the sensor cannot
be used with another system until it
is removed from the current
controller. See the controller's
instructions.
Motion Sensor Open /
Open / Open
Enroll / Enroll / Enroll / Enroll
Mounting Locations
Mounting Locations / Mounting Locations
NOTE: After enrolling and before mounting permanently, conduct Go/No Go tests (see controller's
instructions) to verify adequate signal strength. Adjust the device location and orientation as
necessary.
FC: Note: After enrolling and before mounting permanently, conduct Go/No Go tests (see
controller's instructions) to verify adequate signal strength. Adjust the device location and
orientation as necessary.
SP: Note: After enrolling and before mounting permanently, conduct Go/No Go tests (see
controller's instructions) to verify adequate signal strength. Adjust the device location and
orientation as necessary.
PA: Note: After enrolling and before mounting permanently, conduct Go/No Go tests (see
controller's instructions) to verify adequate signal strength. Adjust the device location and
orientation as necessary.
Mounting Options
Mounting Options / Mounting Options
/ Mounting Locations /
/ Mounting Options /