Table of Contents
Advertisement
6GB10055.fm Page 15 Monday, August 2, 2004 12:33 PM
INSTALLATION
Removal of transport bracket
The washing machine is fitted with a transport bracket to
avoid any possible damage during transport.
Before using the washing machine, the transport
bracket at the back MUST be removed.
1. Unscrew the two screws A and the four screws B with a
flat screwdriver or a No. 8 hex nut box spanner.
2. Remove the transport bracket.
3. Replace the four outer screws B on the machine and
tighten them.
4. Remove the two seals C from the hose holder and clip
them into the openings of the machine D.
Note: do not forget to replace and tighten the four
outer screws.
A
D
C
GB 15
B
1
1
1
2
4
D
4
Advertisement
Table of Contents
