Restoring The Machine's Default Lan Settings To Perform Setup Again - Canon MG8150 Troubleshooting Manual

Restoring the Machine's Default LAN Settings to Perform Setup Again

Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
With Setup displayed on the HOME screen, touch the right FUNCTION button.
2
Select Device settings, then touch the OK button.
3
Select LAN settings, then touch the OK button.
4
Select Reset LAN settings, then touch the OK button.
5
Select Yes, then touch the OK button.
6
Make sure that the completion screen appears, then touch the OK button.
• The LAN settings screen returns. Touch the HOME button.
The LAN setting of the machine is now restored to the default state.
• Perform setup again by following the procedures in "Wireless Setup" and onward or "Wired
Setup" and onward in the printed manual: Getting Started.
<Default State>
Wireless LAN Inactive
SSID BJNPSETUP
Data encryption Inactive
TCP/IP setting Obtain an IP address automatically
Wired LAN Inactive
TCP/IP setting Obtain an IP address automatically