System Tray Icon - Philips CPWUA054 User Manual

Wireless USB Adapter 11g
3. Install the New Driver
After uninstalling the PHILIPS adapter and the old driver, run the new SETUP.exe
file. When the program initial screen appears, click on the Continue button. An
InstallShield window appears warning you to close any open programs on your
computer. Click on the Next button to continue. A screen then appears with the
software license agreement displayed. Click on the Yes button to accept the
agreement and continue with the installation. Once the installation is complete,
click on the Finish button to return to your Windows desktop.
4. Restart the Operating System
After installing the new driver, you must restart the operating system. Click the
Start button in the taskbar, choose the Shut Down... command in the command
menu, click the Restart radio button in the dialog box, and then click the OK
button.
Once Windows starts, it displays the New Hardware Found wizard, followed
immediately by the Configuration menu of the PHILIPS Configuration utility.
Examine this information and make any necessary changes (for example, you may
need to specify an SSID or encryption keys to reconnect to your network). After
you enter the correct information, click the Apply button.
C h a p t e r
4

System Tray Icon

The Configuration Utility is installed simultaneously with the driver. The following
sections describe operation of the utility.
After the installation of the adapter Configuration Utility, its icon appears in the
System Tray in the bottom right corner of your desktop.
The color behind the logo indicates the link status:
Red indicates no or very poor link quality.
Yellow indicates an usable but weak link.
5