Motorola ZN50 User Manual page 21

28p
Battery
Battery in the package is not fully charged therefore make sure to fully charge the battery.
Installing the battery
1. Put the battery. Battery charge terminal and
the phone charge terminal should be engaged
as shown in the figure.
2. Put the battery back properly. Push it until it
clicks.
3. Place the battery cover to the battery cover
groove. Push the battery cover (in the direction
of the arrow as shown in the figure) until it clicks.
Removing the battery
Caution
Make sure that the power is off when you remove the battery.
- If you remove the battery while the phone is on, it may damage your phone.
1. Push the battery cover (in the direction of the
arrow as shown in the figure) while pressing the
battery cover release button.
2. Lift up the battery as shown in the figure.
3. Remove the battery from the phone.