Microsoft Sculpt Touch Mouse Manual page 5

1 Insert two AA alkaline batteries in the device.
Turn on the device. The BlueTrack Technology
2
The first time you turn on your device out of the box, a small light on
top of the device blinks green and red alternately. This indicates that the
device is discoverable to other Bluetooth devices within 6 minutes.
3 Connect the device to your computer:
a. WinDOWs
Control Panel from the search results, and then select Add a device.
WinDOWs 7: From the start menu, select Control Panel, and in
Category view, locate hardware and sound, and then select Add a
device.
b. When the device is listed, select it, and follow the instructions to
complete connection.
note: If you do not connect the device to your computer within 6 minutes
(or if you are reconnecting a device that was connected previously), press
and hold the Connect button on the underside of the device for 3 to 5
seconds to make it discoverable again.
4 When the device is successfully connected, Setup automatically
downloads the Microsoft Mouse and Keyboard Center app to your
computer. You can use this app to access and customize the features for
your device. To complete installation:
WinDOWs 8: From the Control Panel, select system and security to
open the Action Center, and then select install.
WinDOWs 7: Follow the directions displayed on the screen.
8: Press the Windows key, type Control Panel, select
®
www.microsoft.com/hardware/support
light turns on and flashes.
®