Omega Direct Mounted Wall Shelf Assembly Instructions

Step 1 Hold the bracket to the wall in the desired mounting location and
ensure proper spacing is allowed for the shelf length. Mark the
location of the holes in the mounting plate.
(Note: Depending on construction of wall, brackets should be
attached to studs, in-wall-grounds, or solid part of brick or concrete
wall with appropriate fasteners. Four fasteners must be used per
/
9
32˝
bracket for proper stability.)
Hint: Place the shelf over the bracket before marking mounting
plate locations. This will help with proper location of bracket, and
aid in the overall mounting process. Check the shelf with a level
prior to mounting. If the wall is not plumb, spacer washers should
be added. (Mounting SCrewS and SpaCerS are
not inCluded)
Step 2 Mount brackets securely to the wall. Place shelf over brackets.
(See Diagram #1)
Step 3 Snap chrome plate shelf caps into top of each shelf corner.
DIAgRAM 1
WALL PLATE
/
9
32˝
Dimensions are
shown in Millimeters
Call Customer Service at 1-800-221-8665 | Fax 631-563-5041 | www.precisiontools.com
1 9 / ˝
16
14˝
1 9 / ˝
16
18˝
1 9 / ˝
16
2 9 / ˝
32
14˝
9
1 / ˝
16
3 5 / ˝
16
18˝
INSTRUCTIONS
Direct Mounted Wall Shelves
2 9 / ˝
32
FWB14SG 14" single bracket green epoxy
3 5 / ˝
FWB14DG 14" double bracket green epoxy
16
FWB18SG 18" single bracket green epoxy
FWB18DG 18" double bracket green epoxy
FWB21SGN 21" single bracket green epoxy
FWB21DGN 21" double bracket green epoxy
FWB24SGN 24" single bracket green epoxy
FWB24DGN 24" double bracket green epoxy
FWB14SCH 14" single bracket chrome plated
FWB14DCH 14" double bracket chrome plated
FWB18SCH 18" single bracket chrome plated
FWB18DCH 18" double bracket chrome plated
FWB21SCH 21" single bracket chrome plated
FWB21DCH 21" double bracket chrome plated
FWB24SCH 24" single bracket chrome plated
FWB24DCH 24" double bracket chrome plated
ASSEMBLY
Material List
FWS1436G 14" x 36" wall shelf kit
FWS1448G 14" x 48" wall shelf kit
rev. 0311
1 - Bracket
2 - Brackets
1 - Shelf