Table of Contents
Advertisement
above disables all RKE transmit-
ter buttons for all RKE transmit-
ters.
Remote Keyless Entry (RKE)
Transmitter With Integrated Key
REMOTE UNLOCK DOORS
AND LIFTGATE
Press and release the UNLOCK but-
ton on the RKE transmitter once to
unlock the driver's side or twice to
unlock all doors and liftgate. This will
also turn on the Illuminated Entry
system.
REMOTE LOCK DOORS
AND LIFTGATE
Press and release the lock button on
the RKE transmitter to Lock Doors
And Liftgate.
REMOTE KEY UNLOCK ON
FIRST PRESS
This feature lets you program the sys-
tem to unlock either the driver's side,
or all doors, on the first press of the
UNLOCK button on the RKE trans-
mitter.
• For vehicles equipped with an Elec-
tronic Vehicle Information Center
(EVIC), refer to "Electronic Vehicle
Information
Center
Personal
Settings
Programmable Features)" in "Un-
derstanding
Your
Panel" for further information.
• For vehicles not equipped with the
EVIC, the Remote Unlock feature
can be enabled or disabled by per-
forming the following steps:
1. Perform this operation while
standing outside the vehicle.
2. Press and hold the LOCK button
on a programmed RKE transmitter
for at least 4 seconds, but no longer
than 10 seconds. Then, press and hold
the UNLOCK button while still hold-
ing the LOCK button.
3. Release both buttons at the same
time.
4. Test the feature while outside of
the vehicle by pressing the LOCK/
UNLOCK buttons on the RKE trans-
mitter with the ignition switch in the
OFF position and the Key Fob re-
moved.
5. Repeat these steps if you want to
return this feature to its previous set-
ting.
(EVIC)/
(Customer-
NOTE: Pressing the LOCK button
on the RKE transmitter while you
Instrument
are inside the vehicle will activate
the Vehicle Security Alarm. Open-
ing a door with the Vehicle Secu-
rity Alarm activated will cause the
alarm to sound. Press the UN-
LOCK button to deactivate the Ve-
hicle Security Alarm.
19
Advertisement
Chapters
Table of Contents
