Removing/Fitting - Mercedes-Benz V-Class Series 2015 Operating Instructions Manual

The rear seat anchorages have engaged cor-
rectly if:
the seat anchorages engage audibly
R
indicator tab A is no longer visible and is fully
R
retracted into the seat anchorages
X
Move the backrest to the desired position
Y
( page 95).
X
Adjust the head restraint to the desired height
Y
( page 106).
If the rear seat anchorages have not engaged
correctly:
X
Pull release handle ? upwards again.
X
Fold the seat forward slightly, hold handle ;
and pull it back with force so that the seat
anchorages engage correctly.
Indicator tab A must be fully retracted into
the seat anchorages and must not be visible.
Removing/fitting rear seats
G
WARNING
If a seat is not engaged, it may be thrown
about while the vehicle is moving. There is a
risk of an accident and injury.
Always make sure that all seats are engaged
as described.
G
WARNING
If you install the last row of rear seats when
rotated 180°, vehicle occupants in this row of
seats could be endangered by unsecured
loads. There is an increased risk of injury,
possibly even fatal injury, particularly in the
event of an accident, sudden braking or a
sudden change in direction.
Never install the last row of rear seats when
rotated 180° when transporting loads.
Always store and secure objects and loads
properly in the vehicle.
G
WARNING
When adjusting a seat, you or another vehicle
occupant could become trapped by the guide
rail of the seat, for instance. There is a risk of
injury.
Make sure that no one has any part of their
body within the sweep of the seat when
adjusting it.
The only way to ensure that the rear seats will
engage securely is to always keep the ancho-
rages clean and free of foreign objects.
Pay attention to the cable guide when fitting and
removing rear seats with seat heating and seat
ventilation. You could otherwise damage the
cable.
Use only rear seats with seat heating and seat
ventilation that have been delivered with the
vehicle.
If the vehicle is equipped with a table, the but-
tons for the seat heating and seat ventilation
cannot be reached.
Face-to-face position of first row of rear seats
Rear seat folded forward (example: standard rear
seat)
Anchorage for guide rail
:
Release handle
;
Handle
=
Seats
101
Z