Installation; Mounting; Connect Heated Hose; Connect Solenoid Valve - Graco InvisiPac GS35 Plug-Free Instruction Manual

Installation

Installation Installation

Mounting

Mounting Mounting
NOTICE
NOTICE NOTICE
To prevent heat transferring into other components
of the packaging line, ensure that the insulator (P)
is installed.
Low Profile Profile Models: Models: Use a 3/4 in. (19 mm) wrench to
Low Low Profile Models:
adjust nuts that control position of gun assembly on
threaded rod.
All Other Other Models: Models: See the following instructions.
All All Other Models:
Mount manifold on a 1/2 in. (12 mm) diameter bar
using mounting clamp (H) to hold the gun assembly
in place and ensure adhesive is applied properly.
1. Use a 5 mm Allen wrench to loosen the mounting
clamp and slide the gun assembly on the
mounting bar.
2. Tighten the mounting clamp.
Note
Provide enough room to access sides of
applicator for maintenance and repair.
Figure 3 Mounting Clamp
Connect Connect Heated Connect Heated Hose Heated
1. Connect the hose fluid outlet to the manifold fluid
inlet (E). Use two 11/16 in. wrenches to tighten
the hose fitting.
Figure 4 Connect the Heated Hose
3A2805M
H
P
Hose Hose
E
M
2. Connect the cordset (M) to the hose.
3. Connect the hose inlet to the melter system
outlet. See the heated hose manual for
installation guidelines.
4. Connect the hose cordset to melter. See the
heated hose manual for installation guidelines.
Connect Solenoid Connect Connect Solenoid Valve Solenoid
1. Connect 3/8 in. diameter air supply tubing to a
clean, dry, and non-lubricated air supply and to
the push-to-connect air inlet fitting (L).
L
Figure 5 Air Inlet Fitting
2. Connect solenoid valve to 24 VDC or 110 VAC
signal. See Connect Triggering Device, page
For For For applicators applicators without applicators without a a a supplied without
• Use solenoid valves with an override switch.
• Ensure that your solenoid valve is connected to the
manifold with tubing rated for 400°F(204°C).
• Ensure the solenoid valve is rated for
high-temperature applications.
Installation
Valve Valve
supplied solenoid supplied solenoid valve: solenoid valve: valve:
10.
9